y t
3 1
EN
5 a //
Pull the rear derailleur to the back and put the rear
wheel into the frame. Insertion aids in the frame help
you finding the right position. Make sure to place the
chain on the smallest cog.
5 b //
Insert the axle to the very end and tighten it clockwise
afterwards.
5 c //
Tighten the rear axle firmly by hand with around
10 – 15 Nm torque.
5 d //
By pulling out the lever you can change its position.
The lever should be pointed to the front alongside the
seat stays to avoid being damaged.
5 e //
Your rear wheel is mounted.
5 f //
With this lever you can engage the rear derailleur’s
clutch to improve chain tension, or disengage it for
easier rear wheel assembly.
5
REAR WHEEL ASSEMBLY
a
b
c
d
e
f
Содержание RTFM JEFFSY
