YSI 5X00
95
YSI 5X00
94
-
When DHCP is enabled, the IP address is not updated at the IP address
menu.
-
Power cycle the 5X00 whenever a new IP address is configured.
-
Numbers between 0-255 are valid for each of the four (4) IP Address fields.
Subnet Mask
Menus → System → Communications → Ethernet → Subnet Mask
A Subnet mask address can only be configured when DHCP is disabled. The subnet
mask number helps to define the relationship between the host (computers, rout-
ers, switches, etc.) and the rest of the network. Consult the network administrator
when configuring this menu.
Notes:
-
When DHCP is enabled, the Subnet Mask address is not updated at the Subnet
Mask menu.
-
AquaManager users should program the Subnet mask either by force serial
port using AquaManager or locally at the 5X00. Poll node using RS232 com-
munication . Next upload configuration information including: static IP, port,
subnet, and gateway addresses.
-
Numbers between 0-255 are valid for each of the four (4) Subnet Mask IP
Address fields.
Gateway
Menus → System → Communications → Ethernet → Gateway
The Gateway address can only be configured when DHCP is disabled. A gateway IP
refers to a device on a network which sends local network traffic to other networks.
Consult the network administrator when configuring this menu.
Notes:
-
When DHCP is enabled, the Gateway address is not updated at the Gateway
menu.
-
AquaManager users should program the Gateway address either by force
serial port using AquaManager or locally at the 5X00. Poll node using RS232
communication . Next upload configuration information including: static IP,
port, subnet, and gateway addresses.
-
Numbers between 0-255 are valid for each of the four (4) Gateway IP Ad-
dress fields.
Configuring the 5X00
Port
Menus → System → Communications → Ethernet → Port
The default port number for the ethernet module is 10001. Consult the network
administrator when configuring this menu.
Note:
-
AquaManager users should program the port number either by force serial
port using AquaManager or locally at the 5X00. Poll node using RS232 com-
munication . Next upload configuration information including: static IP, port,
subnet, and gateway addresses.
DNS Address
Menus → System → Communications → Ethernet → DNS
Domain Name Service (DNS) refers to the server, or workstation, used to convert
domain names into IP addresses.
Notes:
-
With DHCP enabled, the serial to ethernet device will acquire SMTP and DNS
addresses during initialization.
-
When DHCP is enabled, the DNS address is not updated at the IP address
menu.
-
Numbers between 0-255 are valid for each of the four (4) DNS IP Address fields.
Email Addresses
Menus → System → Communications → Ethernet
→ Email Address
→
Address
→
Address
→
CC/Email
Address
Up to four email addresses can be configured for
5X00 emails.
At a minimum, the
first email address and the CC/email address must be configured.
If the CC/email
address is not configured, 5X00 email alarms will contain no alarm information.
The email ‘
from’
address will be the email address entered in the first
Email Ad-
dress
menu.
Notes:
-
See
Send Test Email Msg
- 99 to verify proper configuration of ethernet
menus.
-
On a network, both master and slave alarm emails are sent to the configured
email addresses in the master.
-
Test the alarm email delivery by creating an alarm condition at the 5X00 and
verify the email(s) is received.
Configuring the 5X00
