manualshive.com logo in svg

YSI MultiDO 5400, Руководство пользователя

Поделиться
Скачать
YSI MultiDO 5400 Скачать руководство пользователя страница 37

YSI 5X00
     73

YSI 5X00
     72

5X00 Configuration and Monitoring

This chapter provides information on the 5X00’s front panel, navigating menus, 
and menu functionality.

The front panel - figure 4.1, is the front component of the 5X00 enclosure. The front 
panel contains the 5X00 display and seven keys. Use the keys to navigate menus and 
instrument system information.

Figure 4.1

This icon indicates helpful information for AquaManager users and is used through-
out this chapter.  AquaManager provides access to 5X00 system information from 
a PC.  Most 5X00 configuration and monitoring can be done using AquaManager.  
See 

Chapter 5 AquaManager

 -page 197. 

Configuring the 5X00

With new features in this release of AquaManager, 

it is strongly recommended 

that AquaManager be used to configure all 5X00, IOEM, REM systems and 

sensor setup menus.  AquaManager is required to upload IOEM mode configu

-

ration to the instrument. In addition, AquaManager must be used to upload 

all sensor setup>sensor system>output 4/20mA menus which menus include 

configuration of IOEM slave and channel to be used for a sensor system output. 

AquaManager includes software checks that help to validate IOEM 4/20mA 

output assignment configuration.

Front Panel Keys

There are seven (7) 5X00 front panel keys - figure 4.1.  Use

▲

and 

▼

 keys to 

scroll and highlight menu lists and to scroll through multiple Run Screens. Use

key to select and enter highlighted submenu item and to hold one of multiple run 
screens from scrolling.  Hold is not an option when there is only one run screen.  
Run screens can be scrolled when held by pressing   

▲

and

▼

keys.

Notes:

 

-

Press and hold

▲

and 

▼

 longer than one second for continuous scrolling.

 

-

Use

▲

and 

▼

to scroll and view additional menu items when a scroll bar 

appears to right of screen.

 

-

Pressing any of the four bottom keys resets any active alarm system. See 

General Alarm - page 131.

Softkeys

Softkey labels appear on the bottom of the display and identify the function of the 
buttons below them.  Softkey labels change in different menus.  Softkey labels and 
corresponding softkey functions are listed in table 4.1.

Note:

 

-

Not all menus and screens display four softkey labels.  If there is no softkey 
label, that softkey has no functionality.

NEW

Configuring the 5X00

Содержание MultiDO 5400










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды