Yosin EVM1001, Инструкция по установке и программированию

Страница: 7 / 17

"# $% &
SYS_1[YY]1_[X…] Beginning Extn of Group YY is X…
SYS_1[YY]2_[X…] Ending Extn of Group YY is X…
SYS_1[YY]3_[X…] Assistant Extn of Group YY is X…
•
Group number YY= 01~32, must be successive
•
When the Extn X… is less than 4 digits, please press # to complete the entering.
0000 means to delete.
•
Wrong No. Prompt will be announced when the number dialed is not in the groups.
•
If Extn are more than 4 digits or exist with another linking line PABX, the special
setting is as table below.
SYS_20_[XX] If Extn length is designated by the prefix number, the pause time of 2 nd p is XX seconds(Default =03)
SYS_60_[X…] Set Area Code to X… ; When X is less than 4 digits, please press # to complete the digit entering. 0000 means to delete
ADM_5[Y…]_9000 To set number Y… as number unused. Once the caller dials Y…, the “Wrong Number” message will be announced.
• Generally, PABX Extension Numbering Scheme has one type or several types listed below:
1 No more than 4 digits Directly enter the extension number
2
More than 4 digits, but several numbers
ahead are identical; it shall not exceed 4
digits with the prefix number excluded. It shall set the "Area Code SYS_60_[ ]" as the prefix number.
The Area Code must be excluded when entering extension number, operator’s number, Number forward, etc.
3
More than 4 digits, but several numbers
ahead are identical; it exceeds 4 digits with
the prefix number excluded.
4
More than 4 digits and several numbers
ahead are different.
5
It is the extension number exist with
another linking line PABX (Link Extension)
Designate the Extn length by prefix number:
Beginning number = SYS_1 [YY ]1 _[0 0 N N] Ending number = SYS_1 [YY ]2 _[0 X
p]
NN: Prefix number for this group of extension.
X= the length of Extn for this group, X=0 means flexible length
= pause for 3 seconds after the P th digit. If P=0, it means EVM will only detect Busy tone cycle for this group.
p= pause for XX seconds(SYS_20_[ XX]) after the p th digit. If p=0, it means EVM will not detect any tone cycle
for this group.
or p = means CPT detection does not refer to tone cycle parameters, but refer to common rule.
Example 1: Company ABC’s extension numbers are from 100~250 and 30~39 (If No-dial after Busy/No-answer prompt, the call will be transferred to assistant’s
extension – 100). When all the extension numbers are less than 4 digits, the program setting is as follows
"
For Group01, beginning number 100, ending number 250: Set SYS_1[01]1_[100]#, SYS_1[01]2_[250]#
" For Group02, beginning number 30, ending number 39, Assistant extension 100: Set SYS_1[02]1_[30]#, SYS_1[02]2_[39]#, SYS_1[02]3_[100]#
Example 2: Company ACC’s extension numbers go from 611000~615999, and the Link Extension numbers go from 721000~728999. The number for the operator
is 9 during working hours, and 611000 during closing hours. The program settings are as follows:
" 611000 ~ 615999 has two identical number ahead, set the Area Code as 61: SYS_60_[61]
"
After excluding the Area Code from 611000 ~ 615999, set beginning number 1000 and ending number 5999 for Group01: SYS_1[01]1_[1000],
SYS_1[01]2_[5999]
" The Operator number during Working Hours is 9. Because it is single digit, no need to exclude the Area Code, set: ADM_41_[9]#
"
The Operator number during closing hours is 611000. After excluding the Area Code, set: ADM_45_[1000]
" For extension number 721000 ~ 728999, the prefix number is 72 and the total length is 6 digits, CPT detection is activated after the 6 th digit with 5
seconds delay, set: SYS_1[02]1_00[72], SYS_1[02]2_[06 6], SYS_20_[05]
"
720000 ~ 720999 are unused numbers, set prefix number 720 as non-registered number by ADM_5[720]#_[9000]
" 729000 ~ 729999 are unused numbers, set prefix number 729 as non-registered number by ADM_5[729]#_[9000]
7