Yosin EVM1001, Инструкция по установке и программированию

Страница: 5 / 17

On-site:
Connect a standard Touch Tone phone set to the “PROG” jack at the rear board of the EVM, pick up the handset and you’ll hear “Welcome to the system
program". Follow the procedures below and Input data.
Remote:
Dial to EVM from CO line or PABX Ext. line, enter System Password by pressing 0 0 during the Greeting message and then you will hear
“Welcome to the system program". Follow the procedures below and Input data.
•
You can enter Administrator Program by pressing 0 during the System Program prompt.
•
You can enter Administrator Program by pressing plus Administrator Password during the Greeting message.
S Y S _ [ ] _ [ ]
DATA
Program Prompt: "ITEM" "Beep" "DATA"
ITEM
Program Prompt: "welcome to the system program"
SYS means System Program
ADM means Administrator Program
•
[Y…] or [X…] indicates the Item/Data is 1 to 4 digits, if
Item/Data less then 4 digits, press to complete the digit
entering. eg. X , XX , XXX .
•
Extn: Extension number
Input new DATA
Press #
to confirm the
entered data
Press # to leave and go back to Greeting
Wait for 3 seconds
without entering
new data
Program Prompt: "Welcome to the system/administrator program"
Program Prompt:
"ITEM" "Beep" "DATA" "To confirm, press # sign, or re-enter"
Input ITEM
SYS_4 _[X]
X: 1=With external switch (See page 3) 2=No external switch (Default)
ADM_11 Switch to working hours
ADM_12 Switch to break hours
ADM_13 Switch to closing hours
ADM_14 Switch to holiday
ADM_15 Switch to temporary announcement
ADM_16
Auto Switch -- the system will automatically switch the Greeting message
based on pre-scheduled business hours.
•
No more Auto-switch again once set to
operation of 11-15. For example, Jan. 1 to Jan.
4 are the holidays, you may enter 14 (Holiday
announcement) on Dec. 31 after work, and
then enter 16 (Auto-switch) on Jan. 5 when
you come back to work, or you may use
ADM_7 to preset the holidays.
ADM_31_[HHMMhhmm] Mon. working hours from HH(hrs) MM(min.) to hh(hrs) mm(min).
ADM_32_[HHMMhhmm] Tue. working hours …
ADM_33_[HHMMhhmm] Wed. working hours …
ADM_34_[HHMMhhmm] Thus. working hours …
ADM_35_[HHMMhhmm] Fri. working hours …
ADM_36_[HHMMhhmm] Sat. working hours …
ADM_37_[HHMMhhmm] Sun. working hours …
•
The default time is 0830~1730 for Mon. to Fri.
1200~1300 for break hour (in a 24 hour
format)
•
Eight zeros mean holiday.
ADM_38_[HHMMhhmm] Break hours … (Default = 1200~1300) 0000 0000 means to delete.
ADM_39_[YYYYMODD] Set present date to YYYY(year) MO(month) DD(day).
ADM_30_[HHMMSSW] Set present time to HH(hrs) MM(min.) SS(sec.), W(week). W: 7 for Sunday, 1 for Monday, and so-forth.
ADM_3 _[X]
The system clock will auto-adjust at every midnight. X: 1 for 1 sec. faster, 2 for 1 sec. slower.
Program Prompt: "4" means auto-adjust slower 4 seconds every day,"4A" means auto-adjust faster 4 seconds every day.
ADM_7[YY]_[MODD] To preset holidays within the year. Index No YY= 01~64; Date: MO(month) DD(day). 0000 means to delete.