York EX Series страница 96 Скачать руководство пользователя

Страница: 96 / 176

JOHNSON CONTROLS

FORM 155.32-ICOM1.EN.GB

ISSUE DATE: 10/13/2017

SECTION 6 – OPERATION

•

Heating:

how long the chiller-heater has been

running in heating mode

•

Solution Pump:

how long the solution pump has

been running.

•

Refrige. Pump:

how long the refrigerant pump

has been running.

•

Burner:

how long the burner for the chiller-heat-

er has been running

The frequency of failures, alarms, and purges is shown

in the Frequency section:

•

Operation:

displays how many times the chiller-

heater has started using the

OPER.

button or a

remote start signal.

•

Cooling:

displays how many times the chiller-

heater has started using the

OPER.

button or a

remote start signal in cooling mode

•

Heating:

displays how many times the chiller-

heater has started using the

OPER.

button or a

remote start signal in heating mode

•

Start:

displays how many times the burner has

started.

•

Failure:

displays how many times the system has

experienced a failure.

•

Alarm:

displays how many times an alarm has

been activated.

•

Auto Purge:

displays how many times the auto-

matic purge system has started.

To move to the Trend screen, press the

Trend

button at

the upper right of the screen.

The History Menu section on the right side of the

screen gives you access to the operation history, Alarm

History and to the Failure History screens. It contains

four buttons:

•

Hourly Operation:

move to the Hourly Opera-

tion History screen

•

Minutely Operation:

move to the Minutely Op-

eration History screen

•

Failure History:

move to the Failure History

screen

•

Alarm History:

move to the Alarm History screen

The Maintenance Information section contains three

buttons. They provide information on how long it has

been since maintenance was done. They also indicate if

maintenance is required. The buttons are:

•

Solution Analysis or Ctrl. Pn. Parts Replace:

Information on the last time solution analysis was

performed or information about parts of the con-

trol panel that need maintenance.

•

Solution Pump Overhaul or Ref. Pump Over-

haul:

Information on the last time the solution

pump or the refrigerant pump were overhauled.

•

Combustion Check or Burner Parts Replace:

Information on the last time a combustion check

was done or how long it has been since any of the

burner parts were replaced.

If the lettering on any of the buttons is red, immediate

attention is needed.

Содержание EX Series

















































































































































































Результаты поиска

Содержание EX Series

Отзывы:

Похожие инструкции для EX Series

Бренды по названию

Популярные бренды

York EX Series, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание EX Series

Отзывы:

Похожие инструкции для EX Series

Бренды по названию

Популярные бренды