76-QD0460EN-01Y00-00
29
■
9.
Performance Inspection Mode
Use this mode to confirm the performance of the tool itself and so on.
9.1.
Attach the battery pack.
9.2.
While pushing the Push Button on the back of the tool, pull the throttle lever and release.
Pushing the push button on the back of the tool, by TF pin 2x90.
9.3.
Release the Push Button of the tool
If the LED starts blinking in white, it indicates that the tool is in inspection mode
9.4.
Change the motor speed
In this performance inspection mode, the motor speed can be changed. (At the start of
the performance inspection mode, the speed is 4800rpm.)
By pushing the Push Button, it toggles the speed between 4800rpm and 2000rpm
※In
the performance inspection mode, the tool does not shut off.
Any change of the parameter setting is not possible. Rundown result, history including
the pulse data etc., would not be stored at all.
When disabling the performance inspection mode, remove the battery to turn it off
