![background image](http://html1.mh-extra.com/html/yokota/yz-th600/yz-th600_instruction-manual_3717953023.webp)
76-QD0460EN-01Y00-00
23
8.5.
Operation by setting device
By connecting the setting device (PC-1 etc.) to the YZ-TH, it is in setting mode and main menu
screen displays.
8.5.1.
Start Screen
After connecting the setting device ( PC-1 etc.), it displays the below screen, and then moves to
the main menu screen. The main menu screen shows YZ-TH model.
8.5.2.
.Parameter Setting
Press enter on the PARAMETER SETTING to go to the parameter setting screen.
Select the setting value by up & down key and by pressing enter [ENT] key, input/change
each parameter setting value.
・
Entering the value: Use the arrow keys to select digit and enter the numbers by
numeric key..
・
Setting value
switching (ON
⇔
OFF, etc.): Press up & down key to change
Press [ENT] to set the input value
Press [CAN] to cancel the input value
If the setting item is more than one page, press [NEXT] key to move to the next page and
press [PREV]to move back to the previous page.
By pressing [MAIN] key or [CAN] key, it moves back to top MAIN MENU screen.
Top: PC-1 Program Ver.
Bottom:YZ-TH Program Ver.
1. PARAM SETTING
2. RUNDOWN DATA
3. PULSE DATA
4. TEST MODE
5. MAINTENANCE
MAIN MENU (600 V1.00)
MAIN MENU (600 V1.00)
1. START VALUE 0
2. SWITCH VALUE 10
3. CUT VALUE 20
4. MAX VALUE 30
5. AVERAGE NO. 3
MAIN NEXT PREV
■
■
V.1.00
V.1.00
CAN
ENT