![background image](http://html1.mh-extra.com/html/yokota/yz-th600/yz-th600_instruction-manual_3717953020.webp)
76-QD0460EN-01Y00-00
20
8.2.
Functions of throttle lever and reverse lever
Throttle lever
After inserting the battery pack and then pulling
the throttle lever, the main shaft rotates.
When pulling the throttle lever lightly, the rotation
speed sets to be [low] and when pulling it more,
it sets to be [middle]. After releasing the throttle
lever, rotational operation stops.
Reverse lever
It switches the rotational direction of the main
shaft. When pressing its R-side and pulling the
throttle lever, it rotates right and when its L-side,
it does left.
※
*While the main shaft rotates, do not operate
the reverse lever.
8.3.
Tightening Judgement (Correlation with judgement, value and pulses
)
①
After tightening, the tool judges whether the tightening results ( the value and pulses) are within
the setting range
②
If the tightening results (value and pulses) are within the setting range, the tool judges OK.
③
If the tightening results (value and pulses) are not within the setting range, the tool judges NG.
④
Tightening NG details
・
Value NG
(
less than cut value
/
more than cut value
/
value before average exceeded max value
・
Pulse NG
(
less than min pulse/more than max pulse
/
slow err
)
⑤
Slow
:
Pulses exceed slow error pulses (70 fixed ) including those less than start value
※
Value
:
A guide value at which the tool will shutoff once it reaches during rundown
Left
Right
Press L side:Left
Press R side:Right
R 側
L 側
Max. Value
Cut value
Value
Pulse
Max pulse
Min pulse
Display Start value
OK
Over Pulse
Over Value
Under Value
Under Pulse