![background image](http://html1.mh-extra.com/html/yokota/yz-th600/yz-th600_instruction-manual_3717953005.webp)
76-QD0460EN-01Y00-00
5
●
Operation, Driving
Warning
・
To protect yourself, wear personal protective equipment such as a hard hat(helmet), safety glasses,
safety shoes. And depending on work environment, wear earplugs, a dust mask etc.
・
Dress properly. When working, do not wear loose clothes or jewelry such a s necklace. If your hairs are
long, bundle them with rubber ring to avoid contact with the tool and wear a protective cover such as
cap. Otherwise, it may cause injury.
・
Use the power tool for tightening of screws. Use for other purposes may cause accident.
・
Avoid the use of the power tool by persons inexperienced for handling. Otherwise, it may
result in injury and/or accident.
・
Use the tool within its capacity. Unreasonable use of the tool in overload could result in the damage or
failure of the tool.
・
Use the tool with proper tightening capability for the object to be tightened. If the capability is too big for
the object, the object or work piece may be broken or damaged and the broken pieces may cause
injury.
・
Keep the tool away from the moving parts of plant facility. Otherwise, the tool may be entangled or
pinched and it may be damaged.
・
Handle the power tool carefully. Abuse may cause accident and/or malfunction. Do not give impacts on
it by throwing or dropping it.
・
Do not use a socket with much wobble.
・
After installation of the attachment, pull it lightly and make sure that it does not come off.
Note that unsecure installation may cause damage on the attachment and/or early malfunction of the
product as well as accidents.
・
If attachments for hand tools are used, there is a risk of breakage which may cause the
accident such as scattering of fragments. Therefore be sure to use attachments for power tools.
・
Use socket stoppers specified by Yokota or socket makers. Do not use wire, a nail and
others as a substitute for a socket stopper, which can cause serious accidents.
・
Fix the work piece (object to be tightened) securely. If the fixing is insufficient, the work piece (object to
be tightened) may be dispersed and it may cause injury.
・
NEVER bring your hand or a cloth and so on to the moving part of the tool.
・
Before attachment of the battery pack to the tool, make sure that the tools such as pins used
for capability adjustment are removed and the throttle lever is in OFF position. Otherwise, the tool
may accidentally operate and it may result in injury.
・
Be sure to check the direction of reverse lever of the power tool before operation.
Be sure to switch the rotational direction while the power tool stops.
・
When running the tool at no load, be sure that the tip tool (like socket, bit and so on) was removed without
fail and be careful around the surroundings. The operation at no lo ad for a long time will result in the part
seizure, early wear and heat generation of the motor.