![background image](http://html1.mh-extra.com/html/yokota/yz-th600/yz-th600_instruction-manual_3717953016.webp)
76-QD0460EN-01Y00-00
16
■
6
.
Preparation before use
Before use, read, especially
「●Installation, Environment」of Chapter 1 「■Safety Care」
carefully and use the product properly after fully understanding the Manual.
Since the battery pack you purchased is not fully charged, fully charge it before use.
6.1.
Method of charging
①
Connect the battery charger to the power supply cord, and insert the power plug into the
receptacle.
The LED of the charger is still off.
②
Insert the battery pack into the battery charger.
Slide the battery pack to the end along with the insertion slot of the battery charger.
When it is correctly installed, the LED lights in red and the charging starts.
※
Depending on the temperature of battery pack, the cooling fan activates or stops.
While charging, operation of the cooling fan varies but it is not the malfunction.
When the charging is completed (fully charged), the LED lights in green.
③
Remove the battery pack from the battery charger
④
Remove the power plug of the battery charger from the receptacle.
6.2.
Lightening pattern of indicator lamp of the battery charger
LED Display Condition LED
Charging Condition
Color
Lighting Condition
Off
Off
Condition of plugging in
Red
Lighting
Charge in process
Green
Blinking
Practical charge(80%)completed
Green
Lighting
Charge completed
Orange
Blinking
Charge standing-by (Temperature of
battery Pack is high/low.)
Red
Blinking Charge impossible (Abnormality etc. of
battery pack)
6.3.
Installation of the battery pack
Slide the battery pack along the insertion slot of the tool to the end and make sure that it does
not come off (it clicks when the battery pack is slid to the end).
6.4.
Removal of the battery pack
While pressing the eject buttons on both sides of the battery pack, slide it to your side