manualshive.com logo in svg

YOKOGAWA WT1800, Руководство пользователя

YOKOGAWA WT1800 - мощный и точный прибор для измерения электрической энергии. Для получения подробной информации о его использовании, загрузите бесплатное руководство пользователя с manualshive.com. Уникальные возможности и функции этого прибора доступны для изучения в руководстве.

Поделиться
Скачать
background image

17-3

IM WT1801-01EN

•  If you enable automatic CSV conversion (Auto CSV Conversion) and set the storage destination to a 

USB memory device, the maximum storage count is computed with 20% of the available USB memory 
designated as valid for stored data (*.WTS and *.HDS files).

•  If the maximum storage count is displayed as 0, there is not enough available memory in the storage 

destination. Make more space available, by deleting files for example.

•  If you change the number of stored items specified in 

Item Settings

 after you set the storage count, the 

maximum storage count will change, and you will need to set the storage count again.

Storage Interval (Interval)

You can set the interval at which numeric data is stored.
•  You can set the hour, minute, and second within the following range. If you set the interval to 00:00:00, the 

numeric data will be stored at the numeric data update interval.

  00:00:00 to 99:59:59
•  When the storage mode is set to Integ Sync, storage continues even when integration is reset by the 

integration timer

. When the integration timer is reset, the storage interval timer is also reset.

•  This setting is invalid when the storage mode is set to Event or Single Shot.

Scheduled Storage Times for Real-Time Storage Mode (Real Time Control)

These settings are only valid when the storage mode is set to Real Time. You can set the year, month, day, hour, 
minute, and second of the storage start and stop times. Be sure to set the storage stop time to a time after the 
storage start time. You can set the values within the following ranges.
•  Year: 

Any four-digit Gregorian calendar value

•  Hour:Minute:Second: 

00:00:00 to 23:59:59

•  Now: 

The scheduled storage start time is set to the current time.

•  Copy: 

The scheduled storage start time is copied into the scheduled storage stop time.

•  You can set the day for the scheduled start or stop time in February to a value as high as the 31st day. If 

you do so, an error message will appear when you start storage. Reset the scheduled start and stop times.

•  The WT1800 recognizes leap years when it executes the storage operation.

Trigger Event for Event-Synchronized Storage Mode (Trigger Event)

This setting is only valid when the storage mode is set to Event. You can select the user-defined event whose 
occurrence will cause storage to start. If you select a disabled user-defined event, storage cannot start.
For information about configuring user-defined events, see “User-Defined Events.”

Click here.

Storage of the Numeric Data at Store Start (Store At Start)

•  Select whether to store the numeric data at store start.
•  You can configure this setting when:

•  The storage mode is set to Manual, and the storage interval is not 00:00:00.
•  The storage mode is set to Real Time, and the storage interval is not 00:00:00.
•  The storage mode is set to Integ Sync.

17   Data Storage

Содержание WT1800








































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WT1800

ABB SM1000 Installation Instructions Manual preview
SM1000
Бренд: ABB Страницы: 8
QLA KT2 Operating Instructions Manual preview
KT2
Бренд: QLA Страницы: 18
Datavideo TL-1 User Manual preview
TL-1
Бренд: Datavideo Страницы: 26
Datcon DT4200 Operating Instructions Manual preview
DT4200
Бренд: Datcon Страницы: 84
AR Arrim ONE User Manual preview
Arrim ONE
Бренд: AR Страницы: 8
THORLABS PM10-10 Operation Manual preview
PM10-10
Бренд: THORLABS Страницы: 21
Balluff BML-S1G0-Q71 Series Condensed Manual preview
BML-S1G0-Q71 Series
Бренд: Balluff Страницы: 20
Meggitt Sensorex SX41170SI Instruction Manual preview
Sensorex SX41170SI
Бренд: Meggitt Страницы: 19
Tru-Test Speedrite Fault Finder Quick Start Manual preview
Speedrite Fault Finder
Бренд: Tru-Test Страницы: 2
Industrial Scientific iTrans 77023554 Manual preview
iTrans 77023554
Бренд: Industrial Scientific Страницы: 94
Bogen AKS16 Installation And Operating Instructions Manual preview
AKS16
Бренд: Bogen Страницы: 14
Kurzweil SP4 Series Musician'S Manual Addendum preview
SP4 Series
Бренд: Kurzweil Страницы: 12
Hanna Instruments HI 991301 Instruction Manual preview
HI 991301
Бренд: Hanna Instruments Страницы: 2
Vogel 65 7120 Operation Manual preview
65 7120
Бренд: Vogel Страницы: 4
Vaisala K-PATENTS PR-23 AX Series Instruction Manual preview
K-PATENTS PR-23 AX Series
Бренд: Vaisala Страницы: 246
AEMC JM875 User Manual preview
JM875
Бренд: AEMC Страницы: 4
THORLABS NR360S User Manual preview
NR360S
Бренд: THORLABS Страницы: 20
MFJ MFJ-836H Instruction Manual preview
MFJ-836H
Бренд: MFJ Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды