YOKOGAWA ScopeCorder DL750P Скачать руководство пользователя страница 51

Страница: 51 / 61

IM 701210-07E

Setup Menu Items

ZOOM (SEARCH)

Select the display mode of zoomed
waveforms

Section 8.5

Select how the normal waveforms and two

zoomed waveforms (Z1 and Z2) are displayed.

Display format of zoomed waveforms

Sets the number of divided windows for

displaying waveforms. Select from Single (no

divisions), Dual, Triad, Quad, Octal, and

Hexadecimal.

Select the trace to zoom on

Only the waveforms that are turned ON can be

zoomed on.

Zoom rate

Set the zoom rate (T/div) of the Z1 and Z2

zoom displays.

Zoom position

Set the zoom position by specifying the zoom

center position (center of the zoom box) in the

range –5 to +5 divisions with the center of the

waveform display frame set to 0 divisions.

Change the range of the automated
measurement of waveform parameters

Set the range of the automated measurement of

waveform parameters to the zoom range of Z1

or Z2.

Move the zoom box to the newest position
of the waveform

Moves the zoom box of Z1 or Z2 to the newest

position (right end) of the main waveform.

This is useful when displaying the newest

waveform expanded in roll mode.

Selecting the Display Mode of Zoomed

Waveforms

Select from the following:

• Main

Displays only the main (unzoomed) waveform.

• Z1 Only

Displays only the zoomed waveform of zoom box Z1.

• Z2 Only

Displays only the zoomed waveform of zoom box Z2.

• Main&Z1

Displays the main waveform in the top window and
zoomed waveform of zoom box Z1 in the bottom
window.

• Main&Z2

Displays the main waveform in the top window and
zoomed waveform of zoom box Z2 in the bottom
window.

• Z1&Z2

Displays the zoomed waveform of zoom box Z1 in
the top window and the zoomed waveform of zoom
box Z2 in the bottom window.

• Main&Z1&Z2

Displays the main waveform in the top window, the
zoomed waveform of zoom box Z1 in the lower left
window and the zoomed waveform of zoom box Z2
in the lower right window.

Note

• The following figure shows the menu that appears when the display mode of zoomed waveform is set to Main&Z1&Z2.

Содержание ScopeCorder DL750P






























































Результаты поиска

Содержание ScopeCorder DL750P

Отзывы:

Похожие инструкции для ScopeCorder DL750P

Бренды по названию

Популярные бренды

YOKOGAWA ScopeCorder DL750P, Руководство по эксплуатации

Результаты поиска

Содержание ScopeCorder DL750P

Отзывы:

Похожие инструкции для ScopeCorder DL750P

Бренды по названию

Популярные бренды