YOKOGAWA ScopeCorder DL750P, Руководство по эксплуатации

Страница: 6 / 61

IM 701210-07E
5
For details on each control, see the chapter or section in the user’s manual indicated by the mark.
TRIGGER
PROTECT key
Section 17.6
Pressing this key causes the LED above the key to illuminate,
and the keys to be disabled. Pressing the key again clears the
condition.
DL750: VOICE MEMO key
Section 7.9
Displays a menu related to the voice memo function.
DL750P: FEED key
Section 9.1
Executes paper feeding on the DL750P
built-in printer.
Pressing the SHIFT key followed by
the FEED key displays a menu related
to the voice memo function.
SIMPLE/ENHANCED key
Sections 6.4 to 6.17
Displays a trigger setup menu. If the indicator below and to the left of the
key is illuminated, simple trigger is enabled; if the indicator below and to
the right of the key is illuminated, enhanced trigger is enabled.
(SHIFT+) MODE key
Sections 6.1 and 6.18
Displays a menu used to select the trigger mode.
Pressing the SHIFT key followed by the MODE key displays
a menu related to action-on-trigger or action-on-stop.
(SHIFT+) POSITION key
Sections 6.2 and 6.3
Sets the trigger position. Pressing the SHIFT key followed by the POSITION
key allows you to set the trigger delay.
MANUAL TRIG key
Section 6.19
Press the key to forcibly activate a trigger.
(SHIFT+) PRINT key
Sections 12.2 to 12.4, and 16.4
Executes the printing of the screen image data.
Pressing the SHIFT key followed by the PRINT key displays
a menu used when printing thescreen image to the internal
printer, USB printer,or network printer.
(SHIFT+) IMAGE SAVE key
Sections 13.11, 13.12, and 16.3
Stores the screen image data to the storage medium.
Pressing the SHIFT key followed by the IMAGE SAVE key
displays a menu related to the saving of the screen image data.
SNAPSHOT key
Section 8.7
Leaves the currently-displayed waveform on the screen
in black and white.
CLEAR TRACE key
Section 8.7
Clears the waveform acquired using the snapshot function and
accumulated waveforms.
NUM KEY key
Section 4.2
Press this key to use the CH1 to CH16 keys as number input keys.
MISC key
Sections 3.5, 13.6, 16.2 to 16.10, 17.1, to 17.5, and 18.4
Displays menus for setting the communications interface, setting the environment,
checking the system status, setting the SCSI ID number, accessing the self-diagnostic
function, turning ON/OFF the LCD backlight, etc.
HELP key
Section 4.7
Turns ON/OFF the help window that provides descriptions about procedures.
SHIFT key
Pressing the key once causes the indicator above the key to illuminate and enables the setup
menu marked below the key in purple to be displayed. Pressing the key again clears the condition.
FILE key
Sections 13.5, 13.7 to 13.12, 13.14, to 13.17 and 16.3
Displays a menu used to save or recall data from various storage media or execute file operations.
TRIGGER
VERTICAL
HORIZONTAL
LCD
ESC key
For a description, see the previous page.
Soft keys
Used to select items on
the soft key menu that
appears when setting up
the DL750/DL750P.
Setup and execution keys/knob
For a description, see the previous page.
Setup and execution keys
For a description, see the figure below.
Jog shuttle
For a description, see the previous page.
Setup and execution keys
For a description, see the figure below.
On the DL750P
FEED
VOICE MEMO