YOKOGAWA ScopeCorder DL750P, Руководство по эксплуатации

Страница: 43 / 61

IM 701210-07E
42
DISPLAY (X-Y)
Display format
Section 8.1
Sets the number of divided windows for
displaying waveforms. Select from Single (no
divisions), Dual, Triad, Quad, Octal, and
Hexadecimal.
Display interpolation
Section 8.2
In areas where less than 1000 points of data
exist in the 10 divisions along the time axis
(referred to as interpolation areas), a
continuous waveform cannot be displayed
because there is not enough sampled points.
In this case, waveform is displayed by
interpolating between data points. Select from
linear interpolation, sine interpolation, and
interpolation OFF.
Graticule
Section 8.3
Select the graticule display format from three
types according to your application.
Accumulate
Section 8.4
Select Persist to hold each waveform on the
screen for a time that is longer than the update
cycle, so that newer waveforms appear
overlapped on older waveforms.
Turn ON/OFF the extra window
See section 8.11
Turn ON/OFF the area that displays data such
as cursor measurement values and automated
measurement values of waveform parameters.
Interpolation When the Area Is an Interpolation
Area
Interpolation When the Area Is not an
Interpolation Area
If the number of data points is greater than or equal to
2002, P-P compression is performed (maximum and
minimum values are determined at certain intervals), and
two points are displayed on a single vertical line (1 raster).
Note
Turn ON/OFF the scale values
Section 8.9
Turn ON/OFF the display of the scale values of
the vertical and horizontal axes of each channel.
Turn ON/OFF the waveform label
Section 8.10
Turn ON/OFF the display of waveform labels.
Level indicator and numeric value display
Section 8.12
Turn ON/OFF the level indicator, which is a level
marker displayed to the right of the waveform
display frame for each waveform, and the display
of the measured values (numeric values) of each
channel in roll mode.
Turn ON/OFF the translucent mode display
Section 8.8
Select ON to set the pop-up menu to translucent
display.
Waveform mapping
Section 8.1
Set the mapping method of the input channels on
the divided windows. Select from Auto, Fixed (in
order by number), and User (arbitrary).
OFF Sine Line
OFF Sine/Line
Setup Menu Items