YOKOGAWA ScopeCorder DL750P, Руководство по эксплуатации

Страница: 9 / 61

IM 701210-07E
8
Basic Key & Jog Shuttle Operations Basic Key & Jog Shuttle Operations Basic Key & Jog Shuttle Operations
This section describes basic key and jog shuttle operations used to enter settings on the DL750/DL750P.
Basic Key Operations
Operations When a Setup Menu Is Displayed
In the case of the ACQ menu
(Setup menu displayed when the ACQ key is pressed)
Menu type on which the jog shuttle is used to set the value
(menu with a or icon)
Press a soft key to set a menu under jog shuttle control ( : selected, : not selected).
Turn the jog shuttle to set the value. Press the arrow keys to change the selected digit.
The NUM KEY key (see page 5) can also be used to enter the value directly.
Menu type on which the jog shuttle is used to select items
(menu with a or icon)
Press a soft key to set a menu under jog shuttle control ( : selected, : not selected).
Turn the jog shuttle to change the setting.
Displaying Setup Menus Indicated by Purple Characters on the Front Panel
Press the SHIFT key to illuminate the indicator above the SHIFT key, and then press the key
corresponding to a setup menu marked in purple.
Note
Menu type on which the item is selected from the displayed selections
The selected item switches each time the soft key is pressed. The selected item is
displayed highlighted.
Menu type on which a selection menu is displayed for selecting items
Press a soft key to display a selection menu, then press the soft key corresponding to the
desired menu item.
Setup menu
Soft keys
Operations When a Setup Dialog Box Is Displayed
In the case of the delay setup dialog box
(When MODE is set to ON and the Delay Setup soft key is pressed on the setup menu that appears when the MEASURE key is pressed)
Select the item you wish to set using the jog shuttle.
Press the
SELECT
key to display the selection menu. Turn the
jog shuttle
to move the
cursor
to the item you wish to set. Press the
SELECT
key to confirm the selection.
The selection item switches each time the
SELECT
key is pressed.
Press the
SELECT
key to display the value entry box. Turn the
jog shuttle
to set the
value. Press the
arrow keys
to change the selected digit. The NUM KEY key can also
be used to enter the value directly.
When Mode is selected
When Edge Count is selected
Value entry box
Selection menu
Setup dialog box
To clear a setup menu or a setup dialog box from the screen, press the ESC key.
Note
Basic Key & Jog Shuttle Operations