manualshive.com logo in svg

YOKOGAWA SC402G, Руководство пользователя

Поделиться
Скачать
YOKOGAWA SC402G Скачать руководство пользователя страница 2

1

Preface

IM 12D08N04-01E

Preface

In order to understand the functions of the SC402G 4-wire conductivity converter, be
sure to read this manual thoroughly before using it.

* The specifications and looks of this product are subject to change without notice, for
the purpose of improving it.

* This manual may not be copied without permission.

 WARNING

Electric discharge

The EXA analyser contains devices that can be damaged by electrostatic discharge.
When servicing this equipment, please observe proper procedures to prevent such
damage. Replacement components should be shipped in conductive packaging. Repair
work should be done at grounded workstations using grounded soldering irons and wrist
straps to avoid electrostatic discharge.

Installation and wiring

The EXA analyser should only be used with equipment that meets the relevant IEC,
American or Canadian standards. Yokogawa accepts no responsibility for the misuse of
this unit.

CAUTION

The Instrument is packed carefully with shock absorbing materials, nevertheless, the
instrument may be damaged or broken if subjected to strong shock, such as if the
instrument is dropped. Handle with care.

Although the instrument has a weatherproof construction, the transmitter can be harmed
if it becomes submerged in water or becomes excessively wet.

Do not use an abrasive or solvent in cleaning the instrument.

 Notice

Contents of this manual are subject to change without notice.

3rd Edition: Sep. 2005 (YK)
All Rights Reserved, Copyright © Oct. 2000, Yokogawa Electric Corporation

Содержание SC402G

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды