YOKOGAWA FG410 Скачать руководство пользователя страница 77

Страница: 77 / 83

6.1 Arbitrary Wave Edit Software Error

The following table summarizes the error specifications of the

Arbitrary Waveform Editor

Table 6-1 Error Messages

Message

Description

Memory Allocation Failed.

Memory for OS operation could not be secured at startup.

No Spline point.

During waveform generation using interpolation, the

interpolation was performed without any control points

specified.

Cannot create two spline point on same X.

Do you want continue?

Displayed when the leftmost and rightmost values of the Y

axis are different when generating a waveform using

interpolation.

File Write error.

An error occurred while a file was being saved in “ARB

Edit”. If this error persists, restart the “ARB Edit”.

File Read error

An error occurred while a file was being read in the “ARB

Edit”. Do not use this file.

Read in is interrupted because the data file

contains data of a model that is not supported.

An error occurred because a data file containing the

information of a model other than the FG410/FG420 was

read. Do not use this file.

Clip Board Open error.

An error occurred during an inter-waveform operation

executed for the clipboard. If this error persists, restart the

“ARB Edit”.

Clip Board Read error.

Clip Board Write error.

Clip Board error.

Constant format error.

An arbitrary function expression for waveform generation

contains an error.

Modify the error cause according to the message.

Syntax error in equation.

Lack of parenthesis.

Unbalance of parenthesis.

Divided by 0.

Compile error.

The unit of the axis was changed.

Indicates that the axis setting is other than the initial state,

when the PWF screen is displayed.

The axis range was set to X[0.0 - 1.0], Y[

−

1.0 -

1.0].

Illegal Font Size.

Modify the specified font size in the printing dialog box.

No Listeners on the INTERFACE.

This error occurs when waveform data transfer, read, or

oscillator settings are performed with no signal generator

connected via USB.

The Sequence Edit Software is running.

Terminate the Sequence Edit Software and

restart.

After terminating the

Sequence Edit Software

, start the

Arbitrary Waveform Editor

Transfer is interrupted because an error

occurred.

If the “-225, ‘Out of memory’” message is displayed

immediately before this message, check the total size of the

FG410/FG420 arbitrary waveform data and delete any

unnecessary data.

If such a message is not displayed, switch off the power of

the FG410/FG410 once before operating again.

IM FG410-61EN

6-2

Содержание FG410




















































































Результаты поиска

Содержание FG410

Отзывы:

Похожие инструкции для FG410

Бренды по названию

Популярные бренды

YOKOGAWA FG410, Руководство пользователя

Результаты поиска

Содержание FG410

Отзывы:

Похожие инструкции для FG410

Бренды по названию

Популярные бренды