YOKOGAWA FG410, Руководство пользователя

Страница: 74 / 83

5.6 Transferring the Waveform and Settings
h) Amplitude range
Click the button to the right of
[Amplitude range]
to display the list of amplitude ranges that
can be selected.
Select the output range by clicking on an item in the list or pressing the
↑ ↓ → ← keys.
If
[Norm
±
FS]
or
[Inv
±
FS]
is selected as the amplitude range, the
[Amplitude]
setting unit is
[Vp-p] . In all other cases, the [Amplitude] setting unit is [Vpk] .
i) Transferring data
Clicking the
Oscillator Setup
button or pressing
Alt + L
transfers the settings in the [Oscillator
Setup]
frame to the signal generator.
If amplitude parameter settings for the FG410 or FG420 are performed with [ARB Edit] , the
following items are forcibly switched.
• Amplitude mode In the case of sequence oscillation only, continuous oscillation is set.
• Load impedance setting Open (Hi-Z)
5.6.5 Cautions during transfer and reading
When performing waveform data transfer, read, or oscillator settings of the main parameters among
the oscillator settings, observe the following cautions.
• Data cannot be transferred unless the driver software is installed normally.
“2.2.1 Installing the USB driver software”
• Do not perform any operation using the
ARB Edit
during data transfer.
• Even when multiple
ARB Edits
are running, it is not possible to transfer data from multiple
ARB Edits
at the same time.
5.6.6 File operations
The settings for the system setting screen are saved to a file or read from a file.
The system setting file for the
ARB Edit
is a binary file in the unique format and cannot be used in
other applications.
Select
[System Setup File] - [Save] (
Alt , F , S
or
Ctrl + S
) on the system setting screen to
display the screen titled
[Save As]
.
Select a saving location, input a file name and click the
Save
button. The file extension is “.ocb”
and can be omitted at file name input.
To read the system setting file, select
[System Setup File] - [Open] (
Alt , F , O
or
Ctrl + O
).
When the screen titled
[Open File]
appears, select a file location, input a file name and click the
Open
button. Other files that can be handled with the
ARB Edit
: “4.6.1 File types”
CAUTION
IM FG410-61EN
5-29