YOKOGAWA FG410 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 83

background image

5.3 Waveform Generation Through Interpolation

5.3.1 Control point setting

Interpolation is applied to the range selected by markers on the waveform display screen.
In the initial state, the following three control points are displayed.

[0.0, 0.0] [0.5, 0.0] [1.0, 0.0]

a) Specifying the control point with a numerical value

Click the index cell in the control point list on the interpolation editing screen and then click the

Insert

button to insert and display a new data line. At this time, value X is the intermediate

value of the previous and following values, and value Y is 0.0.
Click the X or Y cell and change their respective values. The value X that can be input must be
within the range defined by the previous and following control points. Also, X cannot be changed
if it is 0 or 1.
Value Y when X = 1 is the same as when X = 0.
Control points are displayed a

[+]

mark at the specified position in the waveform display area.

b) Specifying the control point with mouse

If any of control points’

[+]

marks are shown in red (selected), click an unmarked location of the

waveform display area to change all marks to light blue (deselected).

c) Moving the control point with mouse

The control point can be moved by dragging the

[+]

mark on the waveform display screen. If the

screen magnification ratio is low, it might be difficult to capture the mark due to the display
resolution.
When a control point is moved with the mouse, linear interpolation is performed and the
waveform display area is overwritten.

d) Deleting the control point

Click the

Delete

button to delete the selected control point.

The selected control point cannot be restored. Take care when using this function.

e) Deleting all the control points

Click the

Delete All

button to select all the set control points. All the set control points are

deleted and the three control points of the initial state are displayed.
The selected control points cannot be restored. Take extra care when using this function.

5.3.2 Interpolation

When the range is selected and the control points are set, perform interpolation. The following three
types of interpolation methods are possible.

•

Linear interpolation where the spaces between control points are interpolated with a straight line

•

Spline interpolation where the spaces between control points are interpolated with a smooth curve

•

Continuous spline interpolation to use such a curve that the waveform is continued outside to the

selected range for interpolation

IM FG410-61EN

5-14

«
...
57
58
59
60
61
...
»

Содержание FG410




















































































Отзывы:

Нет отзывов

Похожие инструкции для FG410

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 2

Бренд: MAER IDROPULITRICI Страницы: 13

ECO Inverter+ 25

Бренд: Oilon Страницы: 58

Бренд: Lampizator Страницы: 32

Бренд: Wacker Neuson Страницы: 36

Бренд: Gorman-Redlich Страницы: 3

MAXX SST VEC049GM

Бренд: Vector Страницы: 10

S-1000MM-M2xx05

Бренд: Perle Страницы: 12

Auto-Link-SPE-G

Бренд: I-novative Страницы: 10

Бренд: Suaoki Страницы: 32

RAKK DAC Mark II

Бренд: Raleigh Audio Страницы: 9

Бренд: Asian Electron Страницы: 16

FRENIC-Multi FRN0.1E1S-2LM1

Бренд: Fuji Electric Страницы: 33

Бренд: Motrona Страницы: 16

Бренд: Datavideo Страницы: 28

Бренд: Teleste Страницы: 44

Avtron SAFETach III SV850

Бренд: Nidec Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды