YOKOGAWA FG410, Руководство пользователя

Страница: 70 / 83

5.6 Transferring the Waveform and Settings
5.6.3 Waveform memory setting
Figure 5-9 System Setup Screen
−
Waveform memory Setup
The
[Wave Memory Setup] frame on the [Waveform] page is used to set the waveform memory
name, waveform memory number, and transfer method. Some signal generator models have items
that cannot be set.
a) Waveform memory name
Input a waveform memory in the area to the right of
[Memory Name]
.
The waveform memory name can be set with up to 20 one-byte alphanumerical characters.
One-byte katakana and double quotation marks cannot be used.
b) Waveform memory number
Click the button to the right of
[Memory Number]
to select a waveform memory number.
Click to increase the memory number and click to decrease the memory number.
It is also possible to directly input a numerical value in the numerical value display area.
FG410/FG420 waveform memory
Waveform data cannot be transferred to memory 0.
Memories 1 to 128 are non-volatile memories. The transferred waveform data in these memories
is saved even after the power is switched off.
CAUTION
IM FG410-61EN
5-25