YOKOGAWA DLM2000 Series Скачать руководство пользователя страница 33

Страница: 33 / 108

2-6

IM 710105-03E

2.3 Connecting the Power

Before Connecting the Power Supply

Make sure that you observe the following points before connecting the power supply.
Failure to do so may cause electric shock or damage to the instrument.

WARNING

• Before connecting the power cord, ensure that the source voltage matches the

rated supply voltage of the DLM2000 and that it is within the maximum rated
voltage of the provided power cord.

• Connect the power cord after checking that the main power switch of the

instrument is turned off.

• To prevent electric shock or fire, be sure to use the power cord for the instrument

that is supplied by YOKOGAWA.

• Make sure to connect protective earth grounding to prevent electric shock.

Connect the power cord to a three-prong power outlet with a protective earth
terminal.

• Do not use an ungrounded extension cord. If you do, the instrument will not be

grounded.

• If an AC outlet that conforms to the supplied power cord is unavailable and you

cannot ground the instrument, do not use the instrument.

French

AVERTISSEMENT

• Avant de brancher le cordon d’alimentation, vérifier que la tension source

correspond à la tension d’alimentation nominale du DLM2000 et qu’elle est
compatible avec la tension nominale maximale du cordon d’alimentation.

• Brancher le cordon d’alimentation après avoir vérifié que l’interrupteur

d’alimentation principal de l’instrument est sur OFF.

• Pour éviter tout risque de choc électrique ou d’incendie, utiliser exclusivement le

cordon d’alimentation fourni par YOKOGAWA et prévu pour l’instrument.

• Relier l’instrument à la terre pour éviter tout risque de choc électrique. Brancher

le cordon d’alimentation sur une prise de courant à trois plots reliée à la terre.

• Toujours utiliser une rallonge avec broche de mise à la terre, à défaut de quoi

l’instrument ne serait pas relié à la terre.

• En l’absence de prise secteur conforme au cordon d’alimentation et dans

l’impossibilité de mettre l’instrument à la terre, ne pas utiliser l’instrument.

Содержание DLM2000 Series













































































































Результаты поиска

Содержание DLM2000 Series

Отзывы:

Похожие инструкции для DLM2000 Series

Бренды по названию

Популярные бренды

YOKOGAWA DLM2000 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLM2000 Series

Отзывы:

Похожие инструкции для DLM2000 Series

Бренды по названию

Популярные бренды