3-2
IM 710105-03E
3.1 Key and Jog Shuttle Operations
Entering Values Using the RESET ( ) and SET ( ) Keys
When you use the jog shuttle to set a value, the jog shuttle setup menu shows a RESET
key mark or a SET key mark.
• RESET Key Mark
If the RESET key mark is displayed, you can press the RESET key to reset the value
to its default value.(The value may not return to its default value depending on the
DLM2000 condition.) The default value is displayed next to the RESET key mark.
• SET Key Mark
If there are two values that you need to set, the SET key mark appears. Press the
SET key to select which value you want to set using the jog shuttle. The jog shuttle
mark in front of the selected value is enlarged.
Like when the RESET key mark is displayed, you can press the RESET key to reset
the value to its default value.
Default value
Item under the control of the jog shuttle
RESET key mark
SET key mark
How to Enter Values in Setup Dialog Boxes
1.
Use the keys to display the appropriate setup dialog box.
2.
Use the
jog shuttle
or the
SET
key (
) to move the cursor to the appropriate
item.
3.
Press the
SET
key (
). The operation varies depending on the selected item.
• A setup menu appears.
• A check box is selected or cleared.
• The item at the cursor is selected.
How to Clear Setup Dialog Boxes
Press the
ESC
key to clear the active setup dialog box.
Scroll Operation
If a vertical or horizontal scroll bar is shown on the screen, you can move the SET key up
and down or left and write to scroll.
