Yetter 5000-005B Скачать руководство пользователя страница 38

Страница: 38 / 40

GERINGHOFF HYDRAULIC CYLINDER RELOCATION

ON SOME GERINGHOFF MODELS, THE HYDRAULIC CYLINDER(S) AND SPRING TENSION
MECHANISM FOR THE DECK PLATE ADJUSTMENT WILL NEED RELOCATED TO ALLOW
CLEARANCE FOR THE MOUNT BRACKET IN THAT LOCATION. FOLLOW THE STEPS BELOW.

OLD LOCATION (INTERFERENCE) HARDWARE TO REMOVE

REPOSITIONING THE CLAMPS

NEW LOCATION REASSEMBLED

STEP 1:

Remove the hardware with the yellow arrows in the photo above. Support the end of the row unit before removing the

mounting straps and bolts for the gearbox (2 horizontal yellow arrows, remove both bolts for each mounting strap).

STEP 2:

Reposition the hydraulic cylinder mounting bracket directly under the snapping rolls. Reposition the clamps for the

cylinder on the opposite side of the swing arm. The swing arm clamp can be pried apart and removed from the adjustment rod.

STEP 3:

Reassemble the hardware in the new location as originally assembly. See photo above on the right for reference.

STEP 4:

Relocate the Spring Assist Mechanism, similar to the way the hydraulic cylinder procedure was accomplished, by

moving the spring directly under the snapping rolls.

Содержание 5000-005B









































Результаты поиска

Содержание 5000-005B

Отзывы:

Похожие инструкции для 5000-005B

Бренды по названию

Популярные бренды

Yetter 5000-005B, Руководство оператора

Результаты поиска

Содержание 5000-005B

Отзывы:

Похожие инструкции для 5000-005B

Бренды по названию

Популярные бренды