manualshive.com logo in svg

Yeasn YPA-2100, Руководство пользователя, Страница: 8 / 91

Поделиться
Скачать
Yeasn YPA-2100 Скачать руководство пользователя страница 8

 

 

3 

 

may cause personal injury or device failure; 

●

Dedicated power adaptor configured for the device should be used: model MDS-060AAS15 B, 

Input 100V- 250V

～

1.5-0.75A 50Hz, Output 15V 4.0A. 

●

Make sure the input voltage is consistent with rated input voltage and the electric wire is correctly 

connected and well grounded; 

●

Do not use multi-pin socket or extend the power line to insert the plug of the device into power 

socket; 

●

Unplug power line and cut off power supply line especially under emergency circumstances; hold 

the power plug to pull out it from the socket rather than pulling the power cord; 

●

Do not touch the power line with wet hands. Check the power line and do not allow the power 

cord to be stamped, pressed by heavy objects or knotted; 

●

Power line damage may cause fire or electric shock. Please check it regularly; 

●

Before testing each patient, clean the contacting part with ethanol for disinfection; 

●

Cut off power and put on dust cover when not using it; 

●

Do not dismantle or touch the interior parts of the device, otherwise it may cause electric shock or 

device failure; 

●

The device has passed electromagnetic compatibility test, which is in accordance with YY 0505

－

2012 standard. Follow below instructions related to EMC (electromagnetic compatibility) when 

mounting and using the device: 

- 

Do not use the device with other electronic devices to avoid electromagnetic disturbance; 

- 

Do not use the device nearby other electric devices to avoid electromagnetic disturbance; 

-  Do not use a power adaptor that is not configured with the device, otherwise it may 

increase the 

- 

electromagnetic emission measure, which may reduce the capacity of resisting disturbance. 

 

Caution: The user is cautioned that changes or modifications not expressly approved by the 

party responsible for compliance could void the user's authority to operate the equipment. 

     

 This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) this device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation. 

Содержание YPA-2100




























































































Отзывы:

Нет отзывов