| Device Network |
10
Importing License Configuration
The following table lists the parameter you can use to import license.
Parameter
lync_license_dat.url
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the Teams feature license.
Example
:
lync_license_dat.url = http://192.168.1.20/License_$MAC.dat
The devices will replace the characters “$MAC” with their MAC addresses during
auto provisioning. For example, the MAC address of one T58A Teams device is
00156543EC97. When performing auto provisioning, the device will request to
download the License_00156543ec97.dat file from the provisioning server address
“http://192.168.1.20”.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Security
>
License
[1]
If you change this parameter, the device will reboot to make the change take effect.
Device Network
Yealink Teams devices operate on an Ethernet local area network (LAN). You can configure the local
area network to accommodate many network designs, which varies by organizations and Yealink Teams
devices.
•
IPv4 and IPv6 Network Settings
•
•
•
•
•
•
•
IPv4 and IPv6 Network Settings
Teams devices support IPv4 addressing mode, IPv6 addressing mode, as well as an IPv4&IPv6 dual-stack
addressing mode. After connected to the wired network, the devices can obtain the IPv4 or IPv6 network
settings from a Dynamic Host Configuration Protocol (DHCP) server if your network supports it. To make
it easier to manage IP settings, we recommend using automated DHCP which is possible to eliminate
repetitive manual data entry. You can also configure IPv4 or IPv6 network settings manually.
Note:
Teams devices comply with the DHCPv4 specifications documented in
, and
DHCPv6 specifications documented in
.
•
IP Addressing Mode Configuration
•
Содержание T58A Teams
Страница 1: ......
