| Device Network |
16
Web UI
Network
>
Basic
>
IPv6 Config
>
Configuration Type(Static IP)
>
Secondary
DNS
Or
Network
>
Basic
>
IPv6 Config
>
Configuration Type(DHCP)
>
Static
DNS(Enable)
>
Secondary DNS
Phone UI
>
Settings
>
Device Settings
>
Network (default password: admin)
>
WAN
Port
>
IPv6 Type(Static IP)
>
Sec.DNS
Or >
Settings
>
Device Settings
>
Network (default password: admin)
>
WAN Port
>
IPv6 Type(DHCP)
>
IPv6 Static DNS(Enable)
>
Sec.DNS
Parameter
static.network.ipv6_icmp_v6.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to obtain IPv6 network settings via SLAAC
(Stateless Address Autoconfiguration).
Note
: It works only if “static.network.ipv6_internet_port.type” is set to 0 (DHCP).
Permitted Values
0
-Disabled
1
-Enabled
Default
1
Web UI
Network
>
Advanced
>
ICMPv6 Status
>
Active
[1]
If you change this parameter, the device will reboot to make the change take effect.
DHCP Option for IPv4
The Teams device can obtain IPv4-related parameters in an IPv4 network via the DHCP option.
Note:
For more information on DHCP options, refer to
•
Supported DHCP Option for IPv4
•
DHCP Option 160 and Option 161
•
DHCP Option 66, Option 43 and Custom Option
•
•
•
Supported DHCP Option for IPv4
The following table lists common DHCP options for IPv4 supported by the devices.
Parameter
DHCP Option
Description
Subnet Mask
1
Specify the client’s subnet mask.
Time Offset
2
Specify the offset of the client's subnet in
seconds from Coordinated
Universal Time (UTC).
Router
3
Specify a list of IP addresses for routers on the
client’s subnet.
Содержание T58A Teams
Страница 1: ......
