Yealink T58A Teams, Руководство администратора

Страница: 75 / 116

| Device Customization |
75
Note:
For VP59 Teams phones, if you disable the power saving feature, the phone will
automatically enter power-saving mode to protect the screen when the phone is inactive for 72
hours. Image persistence may be caused on LCD if power saving is disabled.
The following table lists the parameters you can use to configure power saving.
Parameter features.power_saving.intelligent_mode <y0000000000xx>.cfg
Description
It enables or disables the power saving intelligent mode.
Permitted
Values
0
-Disabled, the phone stays in power-saving mode even if the office hour arrives the next
day.
1
-Enabled, the phone will automatically identify the office hour and exit power-saving mode
once the office hour arrives the next day.
Default
1
Param eter features.power_saving.enable <y0000000000xx>.cfg
Description
It enables or disables the power saving feature.
Note : It is only applicable to VP59 phones.
Permitted
Values 0 -Disabled, the phone automatically enters the power-saving mode to protect the screen
when the phone is inactive for 72 hours. Image persistence may be caused on LCD.
1 -Enabled
Default 1
Web UI Settings
>
Power Saving
>
Power Saving
Parameters features.power_saving.office_hour.idle_timeout <y0000000000xx>.cfg
Description
It configures the time (in minutes) that the phone waits in the idle state before the phone
enters power-saving mode during office hours.
Example :
features.power_saving.office_hour.idle_timeout = 600
The phone will enter power-saving mode when it has been inactivated for 600 minutes (10
hours) during office hours.
Permitted
Values
Integer from 1 to 960
Default
120
Web UI Settings > Power Saving > Office Hour Idle TimeOut
Parameters features.power_saving.off_hour.idle_timeout <y0000000000xx>.cfg
Description
It configures the time (in minutes) that the phone waits in the idle state before IP phone
enters power-saving mode during the non-office hours.
Example
:
features.power_saving.off_hour.idle_timeout = 5
The IP phone will enter power-saving mode when it has been inactivated for 5 minutes
during the non-office hours.