Yealink SIP-T2XP, Руководство администратора

Страница: 91 / 589

Configuring Basic Features
73
Parameters Permitted Values Default
key is locked).
Function Keys: MESSAGE, RD, CONF, HOLD, MUTE, TRAN, OK, X, navigation keys,
soft keys, line keys and memory keys are locked (For SIP-T22P, CONF, HOLD, MUTE
and memory keys do not exist; For SIP-T20P, the MUTE key, soft keys and memory
keys do not exist, but the additional MENU and Directory keys are locked).
All Keys: All keys are locked except the volume key. You are only allowed to dial
emergency numbers, reject incoming calls by pressing the X key, answer incoming
calls by lifting the handset, pressing the Speakerphone key, the HEADSET key or the
OK key, place an active call on hold by pressing the Hold soft key or the HOLD key,
resume the held call by pressing the Resume soft key or the HOLD key, and end the
call by hanging up the handset, pressing the Speakerphone key or pressing the X
key (pressing the X key to end the call is not applicable to SIP-T22P/T20P). For SIP-T22P,
HOLD key does not exist; For SIP-T20P, soft keys do not exist.
If it is set to 0 (Disabled), IP phone lock feature is disabled.
Web User Interface:
Features->Phone Lock->Phone Lock Type
Phone User Interface:
Menu->Settings->Advanced Settings(default password: admin)->Phone Lock
phone_setting.phone_lock.unlock_pin characters within 15 digits 123
Description:
Configures the password for unlocking the keypad.
Web User Interface:
Features->Phone Lock->Phone Unlock PIN (0~15 Digit)
Phone User Interface:
Menu->Settings->Basic Settings->Change PIN
phone_setting.phone_lock.lock_time_out Integer from 0 to 3600 0
Description:
Configures the interval (in seconds) to automatically lock the keypad.
The default value is 0 (the keypad is locked only by long pressing the pound key or
pressing the phone lock key).
Note: It works only if the type of phone lock is preset.
Web User Interface:
Features->Phone Lock->Phone Lock Time Out (0~3600s)
Phone User Interface: