Yealink SIP-T2XP, Руководство администратора

Страница: 502 / 589

Administrator’s Guide for SIP-T2xP IP Phones
484
You can add contacts one by one on the IP phone directly. You can also add multiple
contacts at a time and/or share contacts between IP phones using the local contact
template file. After setup, place the template file to the provisioning server and specify
the access URL of the template file in the configuration files.
When editing a local contact template, learn the following:

<root_contact> indicates the start of a contact list and </root_contact> indicates
the end of a contact list.

<root_group> indicates the start of a group list and </root_group> indicates the
end of a group list.

When specifying a ring tone for a contact or a group, the format of the value must
be Auto (the first registered line), Resource: Silent.wav, Resource: Splash.wav or
Resource: RingN.wav (system ring tone, integer N ranges from 1 to 5) or Custom:
Name.wav (custom ring tone).

When specifying a desired line for a contact, valid values are 0~6. Multiple line IDs
are separated by commas.
The following table lists valid values for each phone model.
Phone Model Values Description
SIP-T20P 0~2
0 stands for Auto (the first registered line)
1~2 stand for line1~line2
SIP-T22P/T26P 0~3
0 stands for Auto (the first registered line)
1~3 stand for line1~line3
SIP-T28P 0~6
0 stands for Auto (the first registered line)
1~6 stand for line1~line6

At most 5 groups can be added to the IP phone.

At most 1000 local contacts can be added to the IP phone.
Procedure
Use the following procedures to customize a local contact template file.
To customize a local contact file:
1. Open the template file using an ASCII editor.
2. For each group that you want to add, add the following string to the file. Each starts
on a separate line:
<group display_name="" ring=""/>
Where:
display_name="" specifies the name of the group.
ring="" specifies the desired ring tone for this group.