Yealink SIP-T2XP, Руководство администратора

Страница: 341 / 589

Configuring Advanced Features
323
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
5. Enter the group name in the Label field.
6. Press the Save soft key to accept the change.
Repeat the step 2-6, you can add more paging groups.
IP phones can receive an RTP stream from the pre-configured multicast address(es)
without involving SIP signaling, and can handle the incoming multicast paging calls
differently depending on the configurations of Paging Barge and Paging Priority Active.
Paging Barge
This parameter defines the priority of the voice call in progress, and decides how the IP
phone handles the incoming multicast paging calls when there is already a voice call in
progress. If the parameter is configured as disabled, all incoming multicast paging calls
will be automatically ignored. If the parameter is the priority value, the incoming
multicast paging calls with higher priority are automatically answered and the ones
with lower priority are ignored.
Paging Priority Active
This parameter decides how the IP phone handles the incoming multicast paging calls
when there is already a multicast paging call in progress. If the parameter is configured
as disabled, the IP phone will automatically ignore all incoming multicast paging calls. If
the parameter is configured as enabled, an incoming multicast paging call with higher
priority is automatically answered, and the one with lower priority is ignored.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
<y0000000000xx>.cf
g
Configure the listening multicast
address.
Parameters:
multicast.listen_address.X.ip_address
multicast.listen_address.X.label
Configure Paging Barge and Paging
Priority Active features.
Parameters:
multicast.receive_priority.enable
multicast.receive_priority.priority
Local Web User Interface
Configure the listening multicast
address.