Yealink SIP-T2XP, Руководство администратора

Страница: 38 / 589

Administrator’s Guide for SIP-T2xP IP Phones
20
following rules:
variable-name = value
-
Associate only one value with one variable.
-
Separate each variable name and value with an equal sign.
-
Set only one variable per line.
-
Put the variable and value on the same line, and do not break the line.
-
Comment the variable on a separated line. Use the pound (#) delimiter to
distinguish the comments.
IP phones perform the auto provisioning function of downloading configuration files,
downloading resource files and upgrading firmware. The transfer protocol is used to
download files from the provisioning server. IP phones support several transport
protocols for provisioning, including FTP, TFTP, HTTP, and HTTPS protocols. And you can
specify the transport protocol in the provisioning server address, for example,
http://xxxxxxx. If not specified, the TFTP protocol is used. The provisioning server
address can be IP address, domain name or URL. If a user name and password are
specified as part of the provisioning server address, for example,
http://user:pwd@/server/dir, they will be used only if the server supports them.
Note
The provisioning server can be on the local LAN or anywhere on the Internet. Use the
following procedure as a recommendation if this is your first provisioning server setup.
For more information on how to set up a provisioning server, refer to
Yealink_SIP-T2_Series_T4_Series_IP_Phones_Auto_Provisioning_Guide
.
A URL should contain forward slashes instead of back slashes and should not contain
spaces. Escape characters are not supported.
If a user name and password are not specified as part of the provisioning server
address, the User Name and Password of the provisioning server configured on the
phone will be used.
There are two types of FTP methods—active and passive. IP phones are not compatible
with active FTP.