Yealink CP969, Руководство администратора

Страница: 92 / 868

Administrator’s Guide for SIP-T5 Series Smart Media Phones
70
If it is set to 0 (Off), the IP phone will use the IPv6 DNS obtained from DHCP.
If it is set to 1 (On), the IP phone will use manually configured static IPv6 DNS.
Note:
It works only if the value of the parameter “static.network.ipv6_internet_port.type”
is set to 0 (DHCP). If you change this parameter, the IP phone will reboot to make the
change take effect.
Web User Interface:
Network->Basic->IPv6 Config->IPv6 Static DNS
Phone User Interface:
Settings->Advanced (default: admin) ->Network->WAN Port->IPv6->Type (DHCP)
->Static DNS
static.network.ipv6_internet_port.ip IPv6 address Blank
Description:
Configures the IPv6 address.
Example:
static.network.ipv6_internet_port.ip = 2026:1234:1:1:215:65ff:fe1f:caa
Note:
It works only if the value of the parameter “static.network.ip_address_mode” is set
to 1 (IPv6) or 2 (IPv4 & IPv6), and "static.network.ipv6_internet_port.type" is set to 1
(Static IP Address). If you change this parameter, the IP phone will reboot to make the
change take effect.
Web User Interface:
Network->Basic->IPv6 Config->Static IP Address->IP Address
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->WAN Port->IPv6->Type
(Static IP) ->IP Address
static.network.ipv6_prefix
Integer from
0 to 128
64
Description:
Configures the IPv6 prefix.
Note:
It works only if the value of the parameter “static.network.ip_address_mode” is set
to 1 (IPv6) or 2 (IPv4 & IPv6), and "static.network.ipv6_internet_port.type" is set to 1
(Static IP Address). If you change this parameter, the IP phone will reboot to make the
change take effect.
Web User Interface:
Network->Basic->IPv6 Config->Static IP Address->IPv6 Prefix(0~128)
Phone User Interface:
Settings->Advanced (default password: admin) ->Network->WAN Port->IPv6->Type