Yealink CP969, Руководство администратора

Страница: 79 / 868

Setting Up Your System
57
3.
Enter the desired time interval in the
Packet Interval (1~3600s)
field.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5.
Click
OK
to reboot the phone.
To configure LLDP feature via phone user interface:
1.
Tap
Settings
->
Advanced
(default password: admin) ->
Network
->
LLDP
.
2.
Tap the
On
radio box in the
LLDP Status
field.
3.
Enter the priority value (1-3600s) in the
Packet Interval
field.
4.
Tap to accept the change.
The phone prompts you to reboot the phone.
5.
Tap
OK
to reboot the phone.
The settings will take effect after a reboot.
CDP
CDP (Cisco Discovery Protocol) allows IP phones to receive and/or transmit device-related
information from/to directly connected devices on the network that are also using the protocol,
and store the information about other devices.
When CDP feature is enabled on IP phones, the IP phones periodically advertise their own
information to the directly connected CDP-enabled switch. The IP phones can also receive CDP
packets from the connected switch. When the VLAN configurations on the IP phones are
different from the ones sent by the switch, the IP phones perform an update and reboot. This
allows the IP phones to be plugged into any switch, obtain their VLAN IDs, and then start
communications with the call control.