Yealink CP969, Руководство администратора

Страница: 385 / 868

Configuring Advanced Features
363
You can also enable no answer forward for all accounts. Do the following:
1)
Tap , and then tap
All Lines
.
The touch screen prompts “Copy to all lines?”.
2)
Tap
OK
to accept the change or
Cancel
to cancel.
5.
Tap , and then tap
Save
to accept the change.
To configure forward international via phone user interface:
1.
Tap
Settings
->
Advanced
(default password: admin) ->
FWD International.
2.
Tap the
FWD International
field.
3.
Tap the desired value in the pop-up dialog box.
4.
Tap to accept the change.
Call Transfer
Call transfer enables IP phones to transfer an existing call to a third party. For example, if party A
is in an active call with party B, party A can transfer this call to party C (the third party). Then,
party B will begin a new call with party C and party A will disconnect.
IP phones support call transfer using the REFER method specified in RFC 3515 and offer three
types of transfer:

Blind Transfer
-- Transfer a call directly to another party without consulting. Blind transfer
is implemented by a simple REFER method without Replaces in the Refer-To header.

Semi-attended Transfer
-- Transfer a call after hearing the ringback tone. Semi-attended
transfer is implemented by a REFER method with Replaces in the Refer-To header.

Attended Transfer
-- Transfer a call with prior consulting. Attended transfer is
implemented by a REFER method with Replaces in the Refer-To header.
Normally, call transfer is completed by tapping the transfer key. Blind transfer on hook and
attended transfer on hook features allow the IP phone to complete the transfer through
on-hook. Blind transfer on hook and attended transfer on hook features are not applicable to
CP960 IP phones.
When a user performs a semi-attended transfer, semi-attended transfer feature determines
whether to display the prompt "
n New Missed Call(s)
" ("n" indicates the number of the missed
calls) on the destination party’s phone touch screen.