Yealink CP969, Руководство администратора

Страница: 158 / 868

Administrator’s Guide for SIP-T5 Series Smart Media Phones
136
Scenario Operations II:
1.
Add/Edit the following parameters in the y000000000058.cfg file or 001565770984.cfg file
you want the IP phone to download:
static.auto_provision.custom.protect = 1
static.auto_provision.custom.sync = 0
static.firmware.url = tftp://192.168.1.211/58.80.0.5.rom
2.
Trigger the IP phone to perform the auto provisioning process. For more information on
how to trigger auto provisioning process, refer to
Triggering the IP Phone to Perform the
Auto Provisioning
section in
Yealink_SIP-T2_Series_T19(P)
E2_T4_Series_T5_Series_W5_Series_CP_Series_IP_Phones_Auto_Provisioning_Guide_V81 .
During auto provisioning, the IP phone first downloads the y000000000058.cfg file, and then
downloads firmware from the root directory of the provisioning server.
The IP phone reboots to complete firmware upgrade, and then starts auto provisioning process
again which is triggered by phone reboot (the power on mode is enabled by default). It
downloads the y000000000058.cfg and 001565770984.cfg files in sequence, and then updates
configurations in the downloaded configuration files orderly to the IP phone system. As the
value of the parameter “static.auto_provision.custom.protect” is set to 1, configurations in the
001565770984-local.cfg file saved on the IP phone are also updated.
The IP phone starts up successfully, and personalized settings are kept after auto provisioning.
When a user customizes feature configurations via web/phone user interface, the IP phone will
save the personalized settings to the 001565770984-local.cfg file on the IP phone only.
Note
If value of the parameter “static.auto_provision.custom.protect” is set to 0, the personalized
settings in the 001565770984-local.cfg file will be overridden after auto provisioning, no matter
what the value of the parameter “static.auto_provision.custom.sync” is.
Scenario B Clear user personalized configuration settings
When the IP phone is gave to a new user but many personalized configurations settings of
last user are saved on the phone; or when the end user encounters some problems
because of the wrong configurations, the administrator or user may wish to clear user
personalized configuration settings via phone user interface.
In this scenario, the IP phone will not upload the MAC-local.cfg file to provisioning server and
request to download the MAC-local.cfg file from provisioning server during auto provisioning.
If a configuration item is both in the MAC-local.cfg file on the IP phone and Common CFG file/
MAC-Oriented CFG file downloaded from auto provisioning server, setting of the configuration
item in the MAC-local CFG file will be written and saved to the IP phone system.