YATO YT-82138, Инструкция по эксплуатации

Страница: 12 / 116

12
EN
O R I G I N A L I N S T R U C T I O N S
PRODUCT OVERVIEW
The petrol hammer is a tool designed for performing demolition and chiselling works in natural stone, arti fi cial stone, marble, etc.
using insertion work tools. The hammer is powered by a combustion engine, which ensures the possibility of working in places
where no electricity has been supplied. The correct, reliable and safe operation of the tool depends on its proper use, therefore:
Read and keep the entire instructions manual before the fi rst use of the product.
The supplier shall not be liable for any damage resulting from failure to comply with the safety instructions and recommendations
speci fi ed in this instructions manual.
EQUIPMENT
The product is delivered complete but requires certain preparatory actions described in further sections of the instructions manual.
TECHNICAL PARAMETERS
Parameter Unit Value
Catalogue No. YT-82138
Weight [kg] 11
Fuel tank capacity [l] 1.3
Impact frequency [min
-1
] 3200
Single impact energy [J] 30 - 35
Tool holder SDS MAX
Engine 1E44F-E
number of cylinders 1
number of strokes 2
cooling Air cooling
Sparking plug type L8RTC
Engine displacement [cm 3 ] 51.7
Engine power [kW] 1.3
Maximum engine rotational speed [min -1 ] 6000
Maximum engine rotational speed (no load) [min -1 ] 7000 ± 300
Rotational speed at rated power [min
-1
] 6000
Max. fuel consumption [l/h] 0.6
Noise
sound pressure L
pA
± K [dB (A)] 84.0 ± 3.0
power L
wA
[dB (A)] 105
Vibration level (front / back handle) [m/s
2
] 10.76 ± 1.5 / 18.39 ± 1.5
The declared total vibration emission value and declared noise emission value have been measured using the standard test
method and can be used to compare one tool to another. The declared total vibration emission value and declared noise emission
can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may di ff er from the declared value, depending on the manner the tool is
used.
Caution! Safety measures to protect the operator, which are based on an assessment of emission exposure under actual con-
ditions of use (including all parts of the work cycle, such as the time when the tool is turned o ff or idle and the activation time),
must be speci fi ed.
GENERAL SAFETY WARNINGS
Warning! Read and view all safety warnings, fi gures, and speci fi cations supplied with the device. Failure to do so may
result in electric shock, fi re, or serious injury.
IMPORTANT. Read carefully before use. Keep for future reference.
Whenever the following term appears in the description: “device”, it should be regarded as a “petrol hammer”.
Keep all warnings and instructions for future reference.