If you are not online, you can assign IP address data to your Ethernet PG/OP channel
with following proceeding:
1.
Start the
SPEED7 Studio
with your project.
2.
Click in the
Project tree
at
‘Devices and networking’
.
ð
You will get a graphical object view of your CPU.
3.
Click at the network
‘PG_OP_Ethernet’
.
4.
Select
‘Context menu
è
Interface properties’
.
ð
A dialog window opens. Here you can enter the IP address data for your
Ethernet PG/OP channel.
5.
Confirm with [OK].
ð
The IP address data are stored in your project listed in
‘Devices and
networking’
at
‘Local components’
.
After transferring your project your CPU can be accessed via Ethernet PG/OP
channel with the set IP address data.
Local components
Slot
Module
...
...
...IP address
...
0
CPU M13-CCF0000
...
...
...
...
-X3
PG_OP_Ethernet
172.20.120.40
...
...
...
10.5 SPEED7 Studio - Hardware configuration - I/O modules
1.
Click in the
‘Project tree’
at
‘PLC... > Device configuration’
.
2.
Starting with slot 1 place in the
‘Device configuration’
yourSystem MICRO modules
in the plugged sequence. For this drag from the hardware catalog the corre-
sponding module to the corresponding position in the
Device configuration
.
Take IP address parame-
ters in project
Hardware configuration of
the modules
VIPA System MICRO
Configuration with VIPA SPEED7 Studio
SPEED7 Studio - Hardware configuration - I/O modules
HB400 | CPU | M13-CCF0000 | en | 18-50
234
