YASKAWA SPEED7 CPU-SC 313-5BF23, Руководство пользователя

Страница: 173 / 244

The PLC programming happens by WinPLC7. Close the hardware configurator and
return to your project in WinPLC7. The PLC program is to be created in the FC 1.
1. In ‘Project content’ choose ‘New è FC’ .
2. Enter "FC1" as block and confirm with [OK].
ð
The editor for FC 1 is called.
Creating parameters
In the upper part of the editor there is the parameter table. In this example the 2 integer
values value1 and value2 are to be compared together. Since both values are read only
by the function, these are to be defined as "in".
1. Select the ‘in à ’ row at the ‘parameter table’ and enter at the field ‘Name’
"value1". Press the [Return] key.
ð
The cursor jumps to the column with the data type.
2. The data type may either directly be entered or be selected from a list of available
data types by pressing the [Return] key. Set the data type to INT and press the
[Return] key.
ð
Now the cursor jumps to the ‘Comment’ column.
3. Here enter "1. compare value" and press the [Return] key.
ð
A new ‘in
à
’ row is created and the cursor jumps to ‘Name’ .
4. Proceed for value2 in the same way as described for value1 .
5. Save the block. A note that the interface of the block was changed may be acknowl-
edged with [Yes].
ð
The parameter table shows the following entries, now:
Enter the program
Programming of the FC 1
VIPA System 300S +
WinPLC7
Example project engineering > Project engineering
HB140 | CPU-SC | 313-5BF23 | en | 19-01 173