YASKAWA PROFINET V1000, Быстрый старт

Страница: 211 / 231

C.2 UL and CSA Standards
u
UL Standards Compliance
The UL/cUL mark applies to products in the United States and Canada indicates that UL has
performed product testing and evaluation and determined that their stringent standards for
product safety have been met. For a product to receive UL certification, all components inside
that product must also receive UL certification.
Figure C.5 UL/cUL Mark
This drive is tested in accordance with UL standard UL508C and complies with UL
requirements. The following conditions must be met to maintain compliance when using this
drive in combination with other equipment:
n Installation Area
Do not install the drive to an area greater than pollution severity 2 (UL standard).
n Ambient Temperature
IP20/NEMA Type 1 enclosure: -10 °C to +40 °C
IP20/IP00 Open-Chassis enclosure: -10 °C to +50 °C
Finless Type: IP20/IP00 enclosure: -10 °C to +50 °C
NEMA Type 4X/IP66 enclosure: -10 °C to +40 °C
n Main Circuit Terminal Wiring
Yaskawa recommends using UL/cUL-Listed closed-loop crimp terminals on all drive models.
Use only the tools recommended by the terminal manufacturer for crimping. Wires should
have a continuous maximum allowable temperature of 75 °C 600 V UL approved vinyl
sheathed insulation.
The wire gauges listed in
Table C.2 , Table C.3 , and Table C.4 are Yaskawa recommendations.
Refer to local codes for proper wire gauge selections.
C.2 UL and CSA Standards
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide 211
C
Standards Compliance