SA221/324/424 Operation Manual
4. Disengage the 4-wheel drive to prevent excessive
tire wear.
5. Do not under any circumstances coast downhill.
6. Check whether the 4-wheel drive is engaged.
7. The braking characteristics differ between the 2-
wheel drive and 4-wheel drive. Always be aware
of the current drive mode and drive accordingly.
8. Always slow down before turning. High speed
turns can cause the tractor to tip over.
9. Always ensure the Slow Moving Vehicle (SMV)
emblem is on the tractor and is clearly visible.
10.Strictly observe all the currently effective local
traffic and safety laws and regulations.
11.Always travel at a speed such that the tractor can
be controlled and is stable.
12.While traveling on roads, avoid sudden turning of
the steering wheel. The preceding action makes
the tractor unstable resulting in an extremely
dangerous situation.
13.While on the road, avoid under any
circumstances operate an implement.
14.While driving on a road with an implement
attached to the 3-point hitch:
• Set the 3-point hitch control lever to the raised
position.
• Lock the 3-point hitch control lever with the
position stop knob.
• During the use of hydraulic flow control/stop knob
to raise the implements:
• avoid fully closing hydraulic flow control/stop
knob that may damage the hydraulic lift circuit
15.When driving the tractor on roads, travel slower
than 10 mph (16 km/h).
■
Push or Tow the Tractor (SA221)
1. Push down Power Take Off (PTO) switch to OFF
position.
2. Disengage the parking brake.
3. Disengage the 4-wheel drive.
(A) Parking brake lock lever
(B) Power Take Off (PTO) switch
(C) Mid-/Rear Power Take Off (PTO) select lever
(D) 2WD/4WD lever
●
When towing the tractor:
• travel slower than 10 mph (16 km/h)
• always have another person sit on the
tractor to allow independent operation of the
steering and brakes when required
! WARNING
(A)
(B)
(D)
(C)
SA221_324_424_OperatorsManual.book 13 ページ ２０１８年６月４日 月曜日 午後５時１９分
Содержание SA Series
Страница 168: ...NOTE SA221_324_424_OperatorsManual book 1...
