Yanmar SA Series, Руководство по эксплуатации

Страница: 88 / 170

10-7
10. 3-POINT HITCH AND DRAWBAR
SA221/324/424 Operation Manual
4. Remove the rear tires from the tractor.
(A) Loosen Bolts
(SA221: 5 pcs SA324/424: 6 pcs)
5. Install top link and lower link onto the tractor.
(A) Top link
(B) Lower links
(C) Lift Rod (Right)
(D) Lift Rod (Left)
(E) Check Chains
(F) Check Chains Nut (2 PCS)
(G) Hinge Pin
(H) Spacer
(I) Parallel Pin
6. Tighten the nuts of check chains (2 PCS) to the
torque of 123~152 ft·lbs (167~206 N·m).
7. Install the rear tires from the tractor.
●
Tighten the rear wheel bolts in a crisscross
sequence.
8. Adjust the check chains.
*For detail, see "Adjust the Check Chain" on page
10-6.
(A)
(A)
(A)
(F)
(B)
(F)
(E)
(D)
(G)
(C)
(H)
(I)
IMPORTANT:
●
Hinge Pin (G), a clevis pin and a cotter pin which
has already been used on the tractor are used
when installing 3-Point hitch kit.
● Install Hinge Pin (G) from righthand side of frame
as shown in figure 5. Please note that Cotter Pin
(I) should be installed to Hinge Pin (G) on the
righthand side of frame.
● When attaching the lift links onto the lower links
for SA324/424, position holes are needed to be
confirmed. (See "2. Adjust Lift Capacity and
Height (SA324/424)" on page 10-8 for detail.
Model
Tightening Torque
ft·lbs (N·m)
SA221
R3 108~127 (146.4 to 172.2)
R4 108~127 (146.4 to 172.2)
SA324
R3 108~127 (146.4 to 172.2)
R4 108~127 (146.4 to 172.2)
SA424
R3 108~127 (146.4 to 172.2)
R4 108~127 (146.4 to 172.2)
10_3pointHitch.fm 7 ページ ２０１８年７月６日 金曜日 午前９時４７分