Yanmar SA Series Скачать руководство пользователя

Страница: 129 / 170

14. PERIODIC SERVICE

14-17

SA221/324/424 Operation Manual

■

Service the Alternator/Fan Belt

1. Check the Alternator/Fan Belt Tension

1. Park the tractor safely and securely.

• For details, see "7. Safe Practices for Parking the

Tractor" on page 1-7.

2. Shut off the engine.
3. Chock all the tires safely and securely.
4. Allow the engine to cool down for several

minutes.

5. Raise the hood.

(A) Alternator/fan belt

6. Using the thumb, gently apply pressure to the

midpoint of the alternator/fan belt between the
pulleys.

7. Check whether the alternator/fan belt deflects

inward by approximately 0.4 to 0.6 in. (10 to
15 mm).

8. If the deflection is not as specified, adjust the

tension of the alternator/fan belt.

(A) 0.4 to 0.6 in. (10 to 15 mm)
(B) Adjusting bolt
(C) Mounting bolt
(D) Fixing bolt

2. Adjust the Alternator/Fan Belt

Tension

1. Loosen the adjusting bolt.
2. Loosen the mounting bolt.
3. Loosen the fixing bolt.
4. Exert an outward pressure on the alternator

housing to attain the correct tension.

5. Tighten the adjusting bolt, and the mounting bolt,

in that order.

6. Check the alternator/fan belt tension.
7. Tighten the fixing bolt.
8. Lower the hood.
9. Confirm that the hood latch locked securely.

Avoid injury!

●

Fingers or loose clothing can get entangled
with rotating parts.

●

Before performing maintenance, shut off the
engine.

●

Allow all the moving parts to completely stop.

! WARNING

(A)

NOTE

●

The above illustration shows 221.

(B)

(D)

(C)

(A)

SA221_324_424_OperatorsManual.book 17 ページ２０１８年６月４日　月曜日　午後５時１９分

Содержание SA Series











































































































































































Результаты поиска

Содержание SA Series

Отзывы:

Похожие инструкции для SA Series

Бренды по названию

Популярные бренды

Yanmar SA Series, Руководство по эксплуатации

Результаты поиска

Содержание SA Series

Отзывы:

Похожие инструкции для SA Series

Бренды по названию

Популярные бренды