Yamaha YZ250(P)/LC, Руководство по эксплуатации для владельца

Страница: 172 / 584

3-20
FRONT BRAKE PAD INSPECTION AND REPLACEMENT
INSP
ADJ
9
Loosen the pad pin
2
.
9
Remove the brake hose holder
3
and
caliper
4
from the front fork.
9
Remove the pad pin and brake pads
5
.
9
Connect the transparent hose
6
to the
bleed screw
7
and place the suitable con-
tainer under its end.
9
Loosen the bleed screw and push the
caliper piston in.
c C
Do not reuse the drained brake fluid.
9
Tighten the bleed screw.
9
Install the brake pads
8
and pad pin.
NOTE:
9
Install the brake pads with their projections
a
into the caliper recesses
b
.
9
Temporarily tighten the pad pin at this point.
9
Install the brake hose holder
9
and caliper
0
and tighten the pad pin
q
.
NOTE:
Fit the brake hose holder cut
c
over the pro-
jection
d
on the front fork and clamp the
brake hose.
Bleed screw:
6 Nm (0.6 m•kg, 4.3 ft•b)
Bolt (caliper):
23 Nm (2.3 m•kg, 17 ft•lb)
Pad pin:
18 Nm (1.8 m•kg, 13 ft•lb)
5NX-9-30-3B 6/5/01 4:06 PM Page 8