Yamaha YSP-2700 Скачать руководство пользователя страница 98

Страница: 98 / 114

APPENDIX

➤

Troubleshooting

Bluetooth

Problem

Cause

Remedy

See page

Receiving

Unable to
connect the unit
to a

Bluetooth

device.

“Bluetooth” is set to “Off”.

Set it to “On”.

Bluetooth

is not selected as the input source.

Select

Bluetooth

as the input source.

Another

Bluetooth

device is connected.

Terminate the current

Bluetooth

connection, and connect to the device from

which audio should be received.

47 , 48

Bluetooth

adaptor, etc. that you want to connect to the unit has a

password other than “0000”.

Use a

Bluetooth

adaptor, etc. whose password is “0000”.

The device does not support A2DP.

Connect to a

Bluetooth

audio device that supports A2DP.

109

The unit and device are too far apart.

Position the

Bluetooth

device so that it is less than 10 m (33 ft) from this unit

and connect the device to this unit.

47, 48

There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

–

No sound is
heard or the
sound is
intermittent via
the unit.

The device is not set to send

Bluetooth

audio signals to the unit.

Check that the

Bluetooth

function of the device is set properly.

–

Playback on the device has not been performed.

Perform playback on the device.

–

The device’s volume is set to minimum.

Turn up the volume level on the device.

–

The unit and device are too far apart.

Move the

Bluetooth

device so that it is less than 10 m (33 ft) from this unit.

47, 48

There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signal.

–

The

Bluetooth

connection of the unit with the device is disconnected.

Perform

Bluetooth

connection operations again.

Содержание YSP-2700



















































































































Результаты поиска

Содержание YSP-2700

Отзывы:

Похожие инструкции для YSP-2700

Бренды по названию

Популярные бренды

Yamaha YSP-2700, Руководство пользователя

Результаты поиска

Содержание YSP-2700

Отзывы:

Похожие инструкции для YSP-2700

Бренды по названию

Популярные бренды