background image

PLAYBACK

Using useful features

En

45

Saving energy with the Eco function

Using the Eco function to reduce the amount of power consumed 
by this unit.

When this function is enabled, the brightness of the front panel 
display is minimized and the maximum volume is reduced.

1

Press the ECO key. 

“ECO ON” is displayed and the front panel display turns off.

The brightness of STATUS indicator is minimized.

Disabling the Eco function

Press the ECO key.

“ECO OFF” is displayed in the front panel display.

• Disable this function for louder playback.

• When this function is enabled, “Dimmer” in the setup menu (p. 85) and “MAX 

VOLUME” in the advanced setup menu (p. 89) cannot be configured.

Switching information displayed in the 
front panel display

Information regarding the input source, surround sound, and 
subwoofer is displayed.

1

Press the INFO (

) key. 

Display changes as follows each time the INFO (

) key is 

pressed. The information varies according to the input 
source.

• Display in playback mode (Beam)

– SURROUND: Playback in surround mode (p. 40)

– MY SUR.: Playback using the My Surround function (p. 76)

– STEREO: Stereo playback (p. 42)

– TARGET: Playback in target playback mode (p. 42)

• Subwoofer status display (SUB Status)

– Wireless: The center unit is connected to the subwoofer via a wireless 

connection (p. 29).

– None: No subwoofer is connected to the unit.

– Wired: When “Bass Out” in the setup menu is set to “Wired” (p. 76).

Using useful features

ECO ON

Input: Name of the input source

(“BLUETOOTH”, or the name of the connected 
device, is displayed with 

Bluetooth

 input.)

T

Beam: Playback mode

T

Decoder: Current decoder (p. 78)

T

Cinema DSP: CINEMA DSP program (p. 41)

T

SUB Status: Subwoofer status

T

INFO (     )

ECO

Содержание YSP-2700



















































































































Отзывы: