Yamaha TZ250M1, Руководство по эксплуатации для владельца

Страница: 91 / 287

STEERING DAMPER ADJUSTMENT
3-38
• Tighten the ring nut
3
using ring nut
wrench
4
.
NOTE:
Set the torque wrench to the ring nut wrench
so that they form a right angle.
Ring nut wrench:
YU-33975/90890-01403
Ring nut (initial tightening):
46 Nm (4.6 m•kg, 33 ft•lb)
ª
• Loosen the ring nut one turn.
• Retighten the ring nut using the ring nut
wrench.
W
Avoid over-tightening.
Ring nut (final tightening):
1 Nm (0.1 m•kg, 0.7 ft•lb)
U
• Check the steering shaft by turning it lock
to lock. If there is any binding, remove the
steering shaft assembly and inspect the
steering bearings.
• Install the handle crown
5
and reservoir
tank
6
.
Steering shaft nut
7 7
:
80 Nm (8.0 m•kg, 58 ft•lb)
Pinch bolt (front fork)
8 8
:
20 Nm (2.0 m•kg, 14 ft•lb)
Bolt (reservoir tank)
9 9
:
5 Nm (0.5 m•kg, 3.6 ft•lb)
º
• Install the cowling.
6. Install:
• Steering damper
EC36V002
STEERING DAMPER ADJUSTMENT
1. Adjust:
• Damping force
By turning the adjuster
1
.
INSP
ADJ
Stiffer
a a
≥ ≥
Increase the compression
damping force. (Turn the
adjuster
1 1
in.)
Softer
b b
≥ ≥
Decrease the compression
damping force. (Turn the
adjuster
1 1
out.)