Yamaha TZ250M1, Руководство по эксплуатации для владельца

Страница: 241 / 287

REAR SHOCK ABSORBER
5-61
EC586000
HANDLING NOTE
W
This shock absorber is provided with a sep-
arate type tank filled with high-pressure
nitrogen gas. To prevent the danger of
explosion, read and understand the follow-
ing information before handling the shock
absorber.
The manufacturer can not be held respon-
sible for property damage or personal
injury that may result from improper han-
dling.
1. Never tamper or attempt to disassemble
the cylinder or the tank.
2. Never throw the shock absorber into an
open flame or other high heat. The
shock absorber may explode as a result
of nitrogen gas expansion and/or dam-
age to the hose.
3. Be careful not to damage any part of the
gas tank. A damaged gas tank will impair
the damping performance or cause a
malfunction.
4. Take care not to scratch the contact sur-
face of the piston rod with the cylinder;
or oil could leak out.
5. Never attempt to remove the plug at the
bottom of the nitrogen gas tank. It is
very dangerous to remove the plug.
6. When scrapping the shock absorber, fol-
low the instructions on disposal.
EC587011
NOTES ON DISPOSAL (YAMAHA DEALERS
ONLY)
Before disposing of the shock absorber, be
sure to extract the nitrogen gas. To do so, drill
a 2 or 3 mm (0.08~0.12 in) hole through the
tank at a position 30 mm (1.2 in) from the bot-
tom end of the tank. At this time, wear eye pro-
tection to prevent eye damage from escaping
gas and/or metal chips.
W
To dispose of a damaged or worn-out
shock absorber, take the unit to your
Yamaha dealer for this disposal procedure.
CHAS