Yamaha TZ250M1, Руководство по эксплуатации для владельца

Страница: 283 / 287

SETTING
7-19
TUN
EC72L003
Chassis setting troubleshooting
Chattering
(Small
rebounds,
Bottoming (full stroke) • Increase spring preload.
up-and-down • Increase damping force for compression.
movements)
Further in stroke • Increase damping force for compression, or
decrease damping force for rebound.
Too stiff (poor stroke) • Decrease spring preload.
• Decrease damping force for compression.
• Down the oil level (for front fork only).
Looseness in parts • Check bolts, bearings, etc. as well as their
installation.
Tire/Rim • Recheck balance.
• Check deformation (runout).
Too stiff
Poor operation • Check the shock absorber.
feeling
(Check rod, inner tube, etc. for bending. If
bent, replace.)
• Check for any deviation from center after
tightening front wheel axle.
(Replace if deviated in any way.)
• Too much tightened bolts for front
fork outer tube
≥
Retorque the bolts to
specification (handle crown, under bracket,
steering damper stay, handlebar).
Too stiff (poor stroke) • Decrease spring preload.
• Decrease damping force (for both compres-
sion and rebound).
Bottoming (full stroke) • Increase spring preload.
• Increase oil level (for front fork only).
• Increase damping force for compression, or
decrease damping force for rebound.
Spongy feeling Poor of damping force • Increase damping force (for both compres-
sion and rebound).
Too soft • Increase spring preload.
<Symptom> <Cause> <Measures>