Yamaha TZ250M1, Руководство по эксплуатации для владельца

Страница: 184 / 287

FRONT WHEEL AND REAR WHEEL
5-4
EC514200
Wheel axle
1. Measure:
• Wheel axle bends
Out of specification
≥
Replace.
Use the dial gauge
1
.
Wheel axle bending limit:
0.25 mm (0.010 in)
a
NOTE:
The bending value is shown by one half of the
dial gauge reading.
W
Do not attempt to straighten a bent axle.
EC594100
Brake disc
1. Measure:
• Brake disc deflection (only rear brake disc)
Use the dial gauge
1
.
Out of specification
≥
Inspect wheel
runout.
If wheel runout is in good condition, replace
the brake disc.
Disc deflection limit:
Standard <Limit>
Rear – 0.15 mm (0.006 in)
≈
2. Measure:
• Brake disc thickness
Use the micrometer
1
.
Out of limit
≥
Replace.
Disc wear limit:
Standard <Limit>
Front 5.0 mm (0.20 in) 4.5 mm (0.18 in)
Rear 4.0 mm (0.16 in) 3.5 mm (0.14 in)
∆
3. Inspect:
• Brake disc surface
Score marks/Damege
≥
Replace.
CHAS